I also made myself a little diaper clutch. Maybe a tutorial for that will follow up at a later date!
Waterproof Change Mat
1/2 yard PUL fabric
1/2 yard cute cotton print
1/2 yard cotton toweling (terry cloth)
2 inch piece of 1 inch wide velcro
Rotary Cutter and Mat or Scissors
Cut one 25x17 inch piece out of all three fabrics.
Cut one 6x2 1/4 inch piece of the cotton print. Set aside.
Lay the three cut pieces on top of each other in this order:
Cotton Print (right side up)
Turn fabric through the opening, making sure the cotton print and PUL layers are on one side as pictured above. You want to make sure when it's turned that you don't see the PUL, only the cotton toweling and cotton print.
Use a point turner to get all four corners nice and smooth. Carefully iron all around then top stitch through all layers and all the way around the mat.
If you want to add the velcro strap so you can roll it up, now is the time! Take your 6x2 1/4 inch piece of fabric. Fold in half right sides together and press. Stitch around one short edge and one long edge. Flip right side out and press. Fold unfinished edge over and press.
Stitch one side of the velcro to one end of the strap.
Measure about 4 inches from one short end of the mat and stitch the opposite end of the velcro strap in place.
Measure down 5 inches from the attached end of the strap and stitch the other piece of velcro in place.
To roll up your mat, fold it in half and roll from bottom to top sticking the velcro pieces together.